Chery Industrial 40' High-Cube Container with Four Side Cargo Doors & Logo

Product Overview

Gain exceptional access to a full-length high-cube interior with this Chery Industrial 40-foot multi-door container. Four supplier-listed side-opening cargo doors and a traditional end-door assembly allow equipment, inventory, and materials to be loaded or retrieved from multiple points along the container.

Corten A weathering-steel construction, a light gray exterior, and an integrated lock box support demanding storage and cargo applications. This one-trip container also features visible Chery Industrial branding.

Key Features

• Four side-opening cargo doors: Provide multiple access points along the container for organized loading and retrieval.
• Traditional end-door assembly: Maintains full-height access through the rear of the container.
• High-cube dimensions: Offers approximately 8.8 feet of internal height for taller items and stacked storage.
• Corten A weathering steel: Provides durable structural construction with corrosion-resistant properties.
• Substantial load capacity: Supports a manufacturer-listed payload of up to 43,519 pounds when used within applicable limits.
• Integrated lock box: Helps shield the primary locking hardware against weather exposure and tampering. A padlock is not listed as included.
• One-trip condition: Listed as “one way new,” generally indicating limited previous cargo use.
• Light gray finish: Uses RAL 7035 for a clean industrial appearance.
• Wood flooring: The supplier lists a 1.1-inch wood thickness, believed to refer to the interior floor.
• Visible supplier branding: The exterior includes the Chery Industrial logo.
• Weather-resistant enclosure: Helps protect compatible contents when the roof, walls, doors, and seals remain properly maintained.

Specifications

Door Configuration Notice

The supplier calls the 7.7' W × 8.3' H side openings “man doors,” but those dimensions describe cargo-sized access points rather than conventional pedestrian doors.

Before ordering, confirm:

• Exact location of all four side-door assemblies
• Whether the doors are distributed across one or both sides
• Clear opening dimensions for each doorway
• Door swing direction and required exterior clearance
• Locking hardware and weather seals
• Interior framing or threshold obstructions
• Whether the selected unit matches the product images and listed configuration

Site Preparation

Prepare a flat, firm, well-drained placement area capable of supporting the container’s 9,392-pound empty weight, its loaded weight, and concentrated loads at the corner castings.

Allow enough space along the sides and rear for every door to open fully. Confirm local zoning, permits, setbacks, foundation requirements, drainage, anchoring, utility locations, and intended use before delivery.

The interior is not automatically ventilated, insulated, or climate-controlled. Condensation, humidity, and temperature changes must be considered when storing moisture-sensitive contents.

Shipping and Certification Notice

A one-trip condition does not automatically confirm current certification for international freight use. If the container will be transported while loaded, verify its CSC plate, inspection status, maximum gross weight, door modifications, and carrier acceptance before purchase.

For stationary storage, confirm local building and zoning requirements.

Weather-Protection Notice

The supplier describes the container as waterproof and weather resistant. Actual resistance to water intrusion depends on the condition and alignment of the doors, gaskets, roof, walls, welds, and floor.

Inspect the complete container after delivery. Maintain damaged coatings, seals, hinges, and locking components promptly.

Delivery and Customer Unloading

This container is delivered on a flatbed truck. Tilt-bed or roll-off unloading is not available.

• Transport dimensions: 480" L × 96" W × 114" H
• Listed container weight: 9,392 lb.
• The customer is responsible for unloading.
• A properly rated crane is recommended.
• A forklift or equivalent machine may be used only when its capacity, load balance, fork configuration, and operating conditions are suitable for the full container weight.

Before delivery, confirm:

• Adequate road, gate, and driveway width
• Sufficient truck turning and parking space
• Firm, level ground suitable for the truck and lifting equipment
• Acceptable weather and soil conditions
• Required crane reach and lifting capacity
• No overhead power lines, tree limbs, structures, or other obstructions
• A prepared foundation and final container orientation

Coordinate qualified unloading personnel and equipment before the flatbed arrives.