Zen DIY Freestanding Pergola Bracket Kit with Slatted Roof – Up to 24' × 24'

Create a Custom Outdoor Retreat Without Attaching It to Your Home

Build a spacious freestanding pergola wherever your property needs shade, structure, and architectural interest. Designed around a stable nine-post, four-block layout, this complete steel bracket system supports custom pergola dimensions up to 24' × 24'.

Inline roof slats can be installed straight or angled, allowing you to customize the pergola’s appearance, airflow, and level of filtered shade. Choose between brackets sized for 4×4 posts with 2×4 components or heavier 6×6 posts with 2×6 components.

Each bracket arrives laser-cut, laser-welded, predrilled, and protected by a premium weather-resistant coating. Stainless steel wood screws are included, leaving you free to source lumber and foundation anchors that fit your project and local requirements.

Key Features

• Fully freestanding design: The nine-post configuration installs independently without requiring attachment to a house or other structure.
• Custom sizing up to 24' × 24': Design the pergola around your patio, garden, pool area, outdoor kitchen, or entertainment space.
• Nine-post structural layout: Provides support at the corners, perimeter intersections, and center of the four-block framework.
• Customizable inline roof slats: Install the slats straight or angled to control the finished appearance, airflow, and amount of filtered shade.
• Four-block roof configuration: Multi-arm brackets organize the pergola into four balanced structural sections.
• Two lumber-size options: Choose brackets compatible with either 4×4 posts and 2×4 components or 6×6 posts and 2×6 components.
• Precision steel fabrication: Brackets are laser-cut and laser-welded for clean edges, accurate fitment, and dependable strength.
• Heavy-duty material options: The 6×6 brackets use premium 12-gauge steel, while all other bracket sizes use 14-gauge steel.
• Protective exterior coating: A premium weather-resistant finish helps protect the steel during long-term outdoor use.
• Predrilled mounting holes: Provide clearly positioned attachment points for lumber and compatible accessories.
• Stainless steel screws included: Supplied #12 wood screws provide corrosion-resistant bracket-to-lumber fastening.
• Five-year bracket warranty: All included steel brackets are backed by a five-year manufacturer warranty.
• Ships from Boise, Idaho: The complete bracket package is delivered directly to your location.

Complete Kit Components

Choose Your Bracket Size

Product Specifications

• Pergola type: Freestanding
• Support configuration: Nine posts
• Roof layout: Four structural blocks
• Roof style: Inline slats
• Slat orientation: Straight or angled
• Maximum advertised size: 24' × 24'
• Bracket construction: Laser-cut and laser-welded steel
• Bracket finish: Premium weather-resistant coating
• Fasteners: Stainless steel #12 wood screws
• Warranty: Five years on included brackets
• Shipping origin: Boise, Idaho

Lumber and Foundation Anchors Not Included

This kit supplies the steel brackets and bracket-to-lumber screws. Buyers must purchase the following separately:

• Structural posts, beams, and roof slats
• Post-base anchoring hardware
• Concrete footings or another approved solid foundation
• Stain, sealer, paint, or other lumber finishes
• Installation tools

Important Installation Information

Lumber dimensions, beam and slat spans, post spacing, footings, and anchoring must comply with manufacturer instructions and applicable building codes.

All nine post bases must be secured to a suitable structural foundation. Pavers, loose blocks, uncompacted soil, and decorative decking alone may not provide adequate anchoring. Professional design or installation may be required based on pergola size, site conditions, and local wind and snow loads.

The open slatted roof provides filtered shade but is not a waterproof roofing system.